EC2303 COMPUTER ARCHITECTURE AND ORGANIZATION Lecture Notes for BME - Sixth (6th) semester and for ECE - Fifth (5th) semester -by R.Anirudhan

EC2303 COMPUTER ARCHITECTURE AND ORGANIZATION  Lecture Notes for BME - Sixth (6th) semester and for ECE - Fifth (5th) semester 


EC2303 Lecture Notes 

Syllabus :

UNIT I INTRODUCTION 
Computing and Computers, Evolution of Computers, VLSI Era, System Design - Register
Level, Processor Level, CPU Organization, Data Representation, Fixed – Point Numbers,
Floating Point Numbers, Instruction Formats, Instruction Types. Addressing modes.

UNIT II DATA PATH DESIGN 
Fixed Point Arithmetic, Addition, Subtraction, Multiplication and Division, Combinational
and Sequential ALUs, Carry look ahead adder, Robertson algorithm, booth’s algorithm,
non-restoring division algorithm, Floating Point Arithmetic, Coprocessor, Pipeline
Processing, Pipeline Design, Modified booth’s Algorithm

UNIT III CONTROL DESIGN 
Hardwired Control, Microprogrammed Control, Multiplier Control Unit, CPU Control Unit,
Pipeline Control, Instruction Pipelines, Pipeline Performance, Superscalar Processing,
Nano Programming.
UNIT IV MEMORY ORGANIZATION 9
Random Access Memories, Serial - Access Memories, RAM Interfaces, Magnetic Surface
Recording, Optical Memories, multilevel memories, Cache & Virtual Memory, Memory
Allocation, Associative Memory.

UNIT V SYSTEM ORGANIZATION 
Communication methods, Buses, Bus Control, Bus Interfacing, Bus arbitration, IO and
system control, IO interface circuits, Handshaking, DMA and interrupts, vectored
interrupts, PCI interrupts, pipeline interrupts, IOP organization, operation systems,
multiprocessors, fault tolerance, RISC and CISC processors, Superscalar and vector
processor.


download Computer Architecture and Organisation Lecture Notes





By Vinoth

by Anirudhan R · 0

BM2021 BIOFLUIDS AND DYNAMICS Lecture Notes for BME - Sixth (6th) semester -by R.Anirudhan

BM2021 BIOFLUIDS AND DYNAMICS Lecture Notes for BME - Sixth (6th) semester


BM2021 Lecture Notes 

Syllabus :

UNIT I BIO-FLUID MECHANICS
 Newton’s laws, Stress, Strain, Elasticity, Hooks-law, viscosity,Newtonian fluid, 
Non-Newtonian fluid, Viscoelastic fluids, vascular tree, Relationship between diameter, 
velocity and pressure of blood flow, Resistance against flow.
BIOVISCOELASTIC FLUID
Viscoelasticity - Viscoelastic models, Maxwell, Voigt and
Kelvin Models, Response to Harmonic variation, Use of viscoelastic models, 
Bio-
Viscoelastic fluids: Protoplasm, Mucus, Saliva, Synovial fluids.

UNIT II FLOW PROPERTIES OF BLOOD
 Physical, Chemical and Rheological properties ofblood. Apparent and relative viscosity, 
Blood viscosity variation: Effect of shear rate,hematocrit, temperature, protein 
contents of blood. Casson’s equation, Problemsassociated with extracorporeal blood flow. 
RHEOLOGY OF BLOOD IN MICROVESSELS
Fahraeus -Lindquist effect and inverse effect, distribution of suspended particles in a
narrow rigid tube. Nature of red blood cells in tightly fitting tubes, hematocrit in very narrow tube.

UNIT III CARDIAC MECHANICS
 Cardiovascular system. Mechanical properties of blood vessels: arteries, arterioles, capillaries 
and veins. Blood flow: Laminar and Turbulent, Physics of cardiovascular diseases, Prosthetic
 heart valves and replacements.
RESPIRATORY MECHANICS
 Alveoli mechanics, Interaction of Blood and Lung P-V
curve of Lung: Breathing mechanism, Airway resistance, Physics of Lung diseases.

UNIT IV SOFT TISSUE MECHANICS
 Pseudo elasticity, non-linear stress-strain relationship,
Viscoelasticity, Structure, function and mechanical properties of skin, ligaments and
tendons.

UNIT V  ORTHOPEDIC MECHANICS
Mechanical properties of cartilage, diffusion properties of
Articular cartilage, mechanical properties of bone, kinetics and kinematics of joints,
lubrication of joints.


download Biofluids and Dynamics Lecture Notes





By Vinoth

by Anirudhan R · 0

BM2406 DIGITAL IMAGE PROCESSING LAB MANUAL for BME - Seventh (7th) semester -by R.Anirudhan

BM2406 DIGITAL IMAGE PROCESSING LAB MANUAL for BME - Seventh (7th) semester 


BM2406 Lab Manual

List of Experiments :

1. Display of Grayscale Images.
2. Histogram Equalization.
3. Non-linear Filtering.
4. Edge detection using Operators.
5. 2-D DFT and DCT.
6. Filtering in frequency domain.
7. Display of color images.
8. conversion between color spaces.
9. DWT of images.
10. Segmentation using watershed transform.

download Digital Image Processing Lab Manual








By Vinoth

by Anirudhan R · 1

BM2403 MEDICAL OPTICS Lecture notes for BME - Seventh (7th) semester -by R.Anirudhan

BM2403 MEDICAL OPTICS Lecture notes for BME - Seventh (7th) semester


BM2403 Lecture Notes 

Syllabus :

UNIT I OPTICAL PROPERTIES OF THE TISSUES
Refraction, Scattering, absorption, light transport inside the tissue, tissue properties, Light
interaction with tissues, optothermal interaction, fluorescence, speckles.

UNIT II INSTRUMENTATION IN PHOTONICS
Instrumentation for absorption, scattering and emission measurements, excitation light
sources – high pressure arc lamp, solid state LEDs, Lasers, optical filters, polarizer, solid
state detectors, time resolved and phase resolved detectors.

UNIT III APPLICATIONS OF LASERS
Laser in tissue welding, lasers in dermatology, lasers in ophthalmology, otolaryngology,
urology.

UNIT IV OPTICAL TOMOGRAPHY
Optical coherence tomography, Elastrography, Doppler optical coherence tomography,
Application towards clinical imaging.

UNIT V SPECIAL OPTICAL TECHNIQUES
Near field imaging of biological structures, in vitro clinical diagnostic, fluorescent
spectroscopy, photodynamic therapy.



download Medical Optics Lecture Notes




By Vinoth

by Anirudhan R · 0

BM2402 MEDICAL INFORMATICS Lecture Notes for BME - Seventh (7th) semester -by R.Anirudhan

BM2402 MEDICAL INFORMATICS Lecture Notes for BME - Seventh (7th) semester



BM2402 Lecture Notes 

Syllabus :


UNIT I MEDICAL INFORMATICS
Introduction - Structure of Medical Informatics –Internet and Medicine -Security issues ,
Computer based medical information retrieval, Hospital management and information
system, Functional capabilities of a computerized HIS, e-health services, Health
Informatics – Medical Informatics, Bioinformatics

UNIT II COMPUTERISED PATIENT RECORD
Introduction - History taking by computer, Dialogue with the computer, Components and
functionality of CPR, Development tools, Intranet, CPR in Radiology- Application server
provider, Clinical information system, Computerized prescriptions for patients.

UNIT III COMPUTERS IN CLINICAL LABORATORY AND MEDICAL IMAGING
Automated clinical laboratories-Automated methods in hematology, cytology and histology,
Intelligent Laboratory Information System - Computerized ECG, EEG and EMG,
Computer assisted medical imaging- nuclear medicine, ultrasound imaging
ultrasonography-computed X-ray tomography, Radiation therapy and planning, Nuclear
Magnetic Resonance

UNIT IV COMPUTER ASSISTED MEDICAL DECISION-MAKING
Neuro computers and Artificial Neural Networks application, Expert system - General
model of CMD, Computer –assisted decision support system-production rule systemcognitive
model, semester networks , decisions analysis in clinical medicine-computers in
the care of critically patients-computer assisted surgery-designing

UNIT V RECENT TRENDS IN MEDICAL INFORMATICS
Virtual reality applications in medicine, Computer assisted surgery , Surgical simulation ,
Telemedicine - Tele surgery computer aids for the handicapped, computer assisted
instrumentation in Medical Informatics - Computer assisted patient education and health -
Medical education and health care information.



download Medical Informatics Lecture Notes





By Vinoth

by Anirudhan R · 0

BM2401 PATTERN RECOGNITION AND NEURAL NETWORKS Lecture Notes for BME - Seventh (7th) semester - R.Anirudhan

BM2401 PATTERN RECOGNITION AND NEURAL NETWORKS Lecture Notes for BME - Seventh (7th) semester


BM2401 Lecture Notes 

Syllabus :

UNIT I INTRODUCTION AND SIMPLE NEURAL NET 
Elementary neurophysiology and biological neural network-Artificial neural network –
Architecture, biases and thresholds, Hebb net, Perceptron, Adaline and Madaline.

UNIT II BACK PROPOGATION AND ASSOCIATIVE MEMORY 
Back propogation network, generalized delta rule, Bidirectional Associative memory,
Hopefield network

UNIT III NEURAL NETWORKS BASED ON COMPETITION 
Kohonen Self organising map, Learning Vector Quantisation, counter propogation
network.

UNIT IV UNSUPERVISED LEARNING AND CLUSTERING ANALYSIS 
Patterns and features, training and learning in pattern recognition, discriminant functions,
different types of pattern recognition. Unsupervised learning- hierarchical clustering,
partitional clustering. Neural pattern recognition approach – perceptron model

UNIT V SUPERVISED LEARNING USING PARAMETRIC AND NON 
PARAMETRIC APPROACH
Bayesian classifier, non parametric density estimation, histograms, kernels, window
estimators, k-nearest neighbour classifier , estimation of error rates.


download Pattern Recognition and Neural Networks Lecture Notes








By Vinoth

by Anirudhan R · 0

CE2308 SOIL MECHANICS LAB MANUAL for CIVIL - Fifth (5th) semester by R.Anirudhan

CE2308 SOIL MECHANICS LAB MANUAL for CIVIL - Fifth (5th) semester


CE2308 Lecture Notes 

List of Experiments :

1. Grain size distribution - Sieve analysis
2. Grain size distribution - Hydrometer analysis
3. Specific gravity of soil grains
4. Relative density of sands
5. Atterberg limits test
6. Determination of moisture - Density relationship using standard Proctor test.
7. Permeability determination (constant head and falling head methods)
8. Determination of shear strength parameters.
9. Direct shear test on cohesionless soil
10. Unconfined compression test on cohesive soil
11. Triaxial compression test (demonstration only)
12. One dimensional consolidation test (Demonstration only)
13. Field density test (Core cutter and sand replacement methods)


download Soil Mechanics Lab Manual 

 








By Vinoth

by Anirudhan R · 0

CE2307 CONCRETE AND HIGHWAY ENGINEERING LAB MANUAL for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2307 CONCRETE AND HIGHWAY ENGINEERING LAB  MANUAL for CIVIL - Fifth (5th) semester


CE2307 Lecture Notes

List of Experiments :

I. TESTS ON FRESH CONCRETE
1. Slump cone test
2. Flow table
3. Compaction factor
4. Vee bee test.
II. TESTS ON HARDENED CONCRETE
1. Compressive strength - Cube & Cylinder
2. Flexure test
3. Modulus Of Elastics
III. TESTS ON BITUMEN
1. Penetration
2. Softening Point
3. Ductility
4. Viscosity
5. Elastic Recovery
6. Storage Stability
IV. TESTS ON AGGREGATES
1. Stripping
2. Soundness
3. Proportioning of Aggregates
4. Water Absorption
V. TESTS ON BITUMINOUS MIXES
1. Determination of Binder Content
2. Marshall Stability and Flow values
3. Specific Gravity
4. Density.


download Concrete and Highway Engineering Lab Manual 






By Vinoth

by Anirudhan R · 0

CE2306 DESIGN OF RC ELEMENTS Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2306 DESIGN OF RC ELEMENTS Lecture Notes for CIVIL - Fifth (5th) semester


CE2306 Lecture Notes 

Syllabus :

UNIT I METHODS OF DESIGN OF CONCRETE STRUCTURES
Concept of Elastic method, ultimate load method and limit state method – Advantages of Limit
State Method over other methods – Design codes and specification – Limit State philosophy as
detailed in IS code – Design of flexural members and slabs by working stress method –
Principles of Design of Liquid retaining structures – Properties of un-cracked section –
Calculation of thickness and reinforcement for Liquid retaining structure

UNIT II LIMIT STATE DESIGN FOR FLEXURE
Analysis and design of one way and two way rectangular slab subjected to uniformly distributed
load for various boundary conditions and corner effects – Analysis and design of singly and
doubly reinforced rectangular and flanged beams

UNIT III LIMIT STATE DESIGN FOR BOND, ANCHORAGE SHEAR & TORSION
Behaviour of RC members in bond and Anchorage - Design requirements as per current code -
Behaviour of RC beams in shear and torsion - Design of RC members for combined bending
shear and torsion.

UNIT IV LIMIT STATE DESIGN OF COLUMNS
Types of columns – Braced and unbraced columns – Design of short column for axial, uniaxial
and biaxial bending – Design of long columns.

UNIT V LIMIT STATE DESIGN OF FOOTING AND DETAILING
Design of wall footing – Design of axially and eccentrically loaded rectangular footing – Design
of combined rectangular footing for two columns only – Standard method of detailing RC
beams, slabs and columns – Special requirements of detailing with reference to erection
process.


download Design of RC Elements Lecture Notes





By Vinoth

by Anirudhan R · 0

CE2305 FOUNDATION ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2305 FOUNDATION ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester

CE2305 Lecture Notes 

Syllabus :

UNIT I SITE INVESTIGATION AND SELECTION OF FOUNDATION
Scope and objectives – Methods of exploration-auguring and boring – Water boring and rotatory
drilling – Depth of boring – Spacing of bore hole - Sampling – Representative and undisturbed
sampling – sampling techniques – Split spoon sampler, Thin tube sampler, Stationary piston
sampler – Bore log report – Penetration tests (SPT and SCPT) – Data interpretation (Strength
parameters and Liquefaction potential) – Selection of foundation based on soil condition.

UNIT II SHALLOW FOUNDATION
Introduction – Location and depth of foundation – codal provisions – bearing capacity of shallow
foundation on homogeneous deposits – Terzaghi’s formula and BIS formula – factors affecting
bearing capacity – problems - Bearing Capacity from insitu tests (SPT, SCPT and plate load) –
Allowable bearing pressure, Settlement – Components of settlement – Determination of
settlement of foundations on granular and clay deposits – Allowable settlements – Codal
provision – Methods of minimising settlement, differential settlement.

UNIT III FOOTINGS AND RAFTS
Types of foundation – Contact pressure distribution below footings and raft - Isolated and
combined footings – Types and proportioning - Mat foundation– Types, applications uses and
proportioning-- floating foundation.

UNIT IV PILES
Types of piles and their function – Factors influencing the selection of pile – Carrying capacity of
single pile in granular and cohesive soil - Static formula - dynamic formulae (Engineering news
and Hiley’s) – Capacity from insitu tests (SPT and SCPT) – Negative skin friction – uplift
capacity – Group capacity by different methods (Feld’s rule, Converse Labarra formula and
block failure criterion) – Settlement of pile groups – Interpretation of pile load test – Forces on
pile caps – under reamed piles – Capacity under compression and uplift.

UNIT V RETAINING WALLS
Plastic equilibrium in soils – active and passive states – Rankine’s theory – cohesionless and
cohesive soil - Coloumb’s wedge theory – condition for critical failure plane - Earth pressure on
retaining walls of simple configurations – Graphical methods (Rebhann and Culmann) -
pressure on the wall due to line load – Stability of retaining walls.



download Foundation Engineering Lecture Notes









By Vinoth

by Anirudhan R · 0

CE2304 ENVIRONMENTAL ENGINEERING – I Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2304 ENVIRONMENTAL ENGINEERING – I Lecture Notes for CIVIL - Fifth (5th) semester


CE2304 Lecture Notes

Syllabus :

UNIT I PLANNING FOR WATERSUPPLY SYSTEM 
Public water supply system -Planning -Objectives -Design period -Population forecasting -Water
demand -Sources of water and their characteristics -Surface and Groundwater- Impounding
Reservoir Well hydraulics -Development and selection of source - Water quality -
Characterization -Water quality standards.

UNIT II CONVEYANCE SYSTEM 
Water supply -intake structures -Functions and drawings -Pipes and conduits for water- Pipe
materials -Hydraulics of flow in pipes -Transmission main design -Laying, jointing and testing of
pipes -Drawings appurtenances - Types and capacity of pumps -Selection of pumps and pipe
materials.

UNIT III WATER TREATMENT 
Objectives -Unit operations and processes -Principles, functions design and drawing of Flash
mixers, fiocculators, sedimentation tanks and sand filters -Disinfection- Residue Management.

UNIT IV ADVANCED WATER TREATMENT 
Aerator- Iron and manganese removal, Defluoridation and demineralization -Water softening -
Desalination -Membrane Systems -Construction and Operation & Maintenance aspects of
Water Treatment Plants -Recent advances -Membrane Processes

UNIT V WATER DISTRIBUTION AND SUPPLY TO BUILDINGS 
Requirements of water distribution -Components -Service reservoirs -Functions and drawings -
Network design -Economics -Computer applications -Analysis of distribution networks -
Appurtenances -operation and maintenance -Leak detection, Methods. Principles of design of
water supply in buildings -House service connection -Fixtures and fittings -Systems of plumbing
and drawings of types of plumbing.


download Environmental Engineering - I Lecture Notes





By Vinoth

by Anirudhan R · 0

CE2303 RAILWAYS, AIRPORTS AND HARBOUR ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2303 RAILWAYS, AIRPORTS AND HARBOUR ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester


CE2302 Lecture Notes

Syllabus :

UNIT I RAILWAY PLANNING AND DESIGN 
Role of Indian Railways in National Development – Railways for Urban Transportation – LRT & 
MRTS - Engineering Surveys for Track Alignment – Obligatory points - Conventional and 
Modern methods (Remote Sensing, GIS & GPS, EDM and other equipments) - Permanent Way, 
its Components and their Functions: Rails - Types of Rails, Rail Fastenings, Concept of
Gauges, Coning of Wheels, Creeps and kinks -Sleepers – Functions, Materials, Density – 
Functions, Materials, Ballastless Tracks - Geometric Design of Railway Tracks – Gradients and 
Grade Compensation, Super-Elevation, Widening of Gauges in Curves, Transition Curves, 
Horizontal and Vertical Curves.

UNIT II RAILWAY TRACK CONSTRUCTION, MAINTENANCE AND OPERATION 
Points and Crossings - Design of Turnouts, Working Principle - Signalling, Interlocking and 
Track Circuiting - Construction & Maintenance – Conventional, Modern methods and Materials, 
Track Drainage - Track Modernisation– Automated maintenance and upgrading, Re-laying of 
Track, Lay outs of Railway Stations and Yards, Rolling Stock, Tractive Power, Track 
Resistance, Level Crossings.

UNIT III AIRPORT PLANNING AND DESIGN 
Role of Air Transport, Components of Airports - Airport Planning – Air traffic potential, Site 
Selection, Design of Components, Cost Estimates, Evaluation and Institutional arrangements 
Runway Design- Orientation, Cross wind Component, Wind rose Diagram (Problems), 
Geometric Design and Corrections for Gradients (Problems), Drainage - Taxiway Design – 
Geometric Design Elements, Minimum Separation Distances, Design Speed, Airport Drainage - 
Airport Zoning - Clear Zone, Approach Zone, Buffer Zone, Turning Zone, Clearance over 
Highways and Railways

UNIT IV AIRPORT LAYOUTS, VISUAL AIDS, AND AIR TRAFFIC CONTROL 
Airport Layouts – Apron, Terminal Building, Hangars, Motor Vehicle Parking Area and
Circulation Pattern, Case studies of Airport Layouts - Airport Buildings – Primary functions, 
Planning Concept, Principles of Passenger Flow, Passenger Facilities - Visual Aids – Runway 
and Taxiway Markings, Wind Direction Indicators, Runway and Taxiway Lightings - Air Traffic 
Control – Basic Actions, Air Traffic Control Network - Helipads, Hangars, Service Equipments.

UNIT V HARBOUR ENGINEERING 
Definition of Terms - Harbours, Ports, Docks, Tides and Waves, Littoral Drift, Sounding, Area, 
Depth, Satellite Ports - Requirements and Classification of Harbours - Site Selection & 
Selection Investigation – Speed of water, Dredging, Range of Tides, Waves and Tidal Currents, 
Littoral Transport with Erosion and Deposition, Soundings, Anchoring Grounds, Geological 
Characteristics, Winds & Storms, Position and Size of Shoals - Shore Considerations- Proximity 
to Towns/Cities, Utilities, Construction Materials, Coast Lines - Dry and Wet Docks, Planning 
and Layouts - Entrance, Position of Light Houses, Navigating - Terminal Facilities – Port 
Buildings, Warehouse, Transit Sheds, Inter-modal Transfer Facilities, Mooring Accessories, 
Navigational Aids - Coastal Structures- Piers, Breakwaters, Wharves, Jetties, Quays, Spring 
Fenders - Coastal Shipping, Inland Water Transport and Container Transportation.

download Railways, Airports and Harbour Engineering Lecture Notes 






By Vinoth

by Anirudhan R · 0

CE2302 STRUCTURAL ANALYSIS I Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2302 STRUCTURAL ANALYSIS I Lecture Notes for CIVIL - Fifth (5th) semester

CE2302 Lecture Notes 

Syllabus :

UNIT I DEFLECTION OF DETERMINATE STRUCTURES 12
Principles of virtual work for deflections – Deflections of pin-jointed plane frames and rigid plane
frames – Willot diagram - Mohr’s correction

UNIT II MOVING LOADS AND INFLUENCE LINES 12
(DETERMINATE & INDETERMINATE STRUCTURES WITH REDUNDANCY
RESTRICTED TO ONE)
Influence lines for reactions in statically determinate structures – influence lines for members
forces in pin-jointed frames – Influence lines for shear force and bending moment in beam
sections – Calculation of critical stress resultants due to concentrated and distributed moving
loads. Muller Breslau’s principle – Influence lines for continuous beams and single storey rigid
frames – Indirect model analysis for influence lines of indeterminate structures – Beggs
deformeter

UNIT III ARCHES
Arches as structural forms – Examples of arch structures – Types of arches – Analysis of three
hinged, two hinged and fixed arches, parabolic and circular arches – Settlement and
temperature effects.

UNIT IV SLOPE DEFLECTION METHOD
Continuous beams and rigid frames (with and without sway) – Symmetry and antisymmetry –
Simplification for hinged end – Support displacements

UNIT V MOMENT DISTRIBUTION METHOD
Distribution and carry over of moments – Stiffness and carry over factors – Analysis of
continuous beams – Plane rigid frames with and without sway – Naylor’s simplification.



download Structural Analysis I Lecture Notes




By Vinoth

by Anirudhan R · 0

CE2301 IRRIGATION ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester -by R.Anirudhan

CE2301 IRRIGATION ENGINEERING Lecture Notes for CIVIL - Fifth (5th) semester

CE2301 Lecture Notes 


Syllabus :



UNIT I INTRODUCTION 
Irrigation – Need and mode of irrigation – Merits and demerits of irrigation – Crop and crop
seasons – consumptive use of water – Duty – Factors affecting duty – Irrigation efficiencies –
Planning and Development of irrigation projects.


UNIT II IRRIGATION METHODS 
Canal irrigation – Lift irrigation – Tank irrigation – Flooding methods – Merits and demerits –
Sprinkler irrigation – Drip irrigation


UNIT III DIVERSION AND IMPOUNDING STRUCTURES 
Weirs – elementary profile of a weir – weirs on pervious foundations - Types of impounding
structures - Percolation ponds – Tanks, Sluices and Weirs – Gravity dams – Earth dams – Arch
dams – Spillways – Factors affecting location and type of dams – Forces on a dam – Hydraulic
design of dams.


UNIT IV CANAL IRRIGATION 
Alignment of canals – Classification of canals – Canal drops – Hydraulic design of drops –
Cross drainage works – Hydraulic design of cross drainage works – Canal Head works – Canal regulators – River Training works.


UNIT V IRRIGATION WATER MANAGEMENT 
Need for optimisation of water use – Minimising irrigation water losses – On farm development
works - Participatory irrigation management – Water users associations – Changing paradigms
in water management – Performance evaluation.


download Irrigation Engineering Lecture Notes








By Vinoth

by Anirudhan R · 0

Anna University 2012 Rank List Published -www.annauniv.edu/tnea2012 TNEA 2012 Rank list available Now

Anna University 2012 Rank List, TNEA 2012 Rank list, check your Anna University 2012 Rank List, Anna university Engineering counselling Rank List

The Anna university 2012 Rank list will be published on 30th june 2012. you can check your Rank list on www.annauniv.edu/tnea2012/ with your application number. Let me say you some information regarding the Rank list
IF THE ANNA UNIVERSITY PAGE IS NOT LOADING YOU CAN SEE THE RANK LIST BELOW:



How they are calculating the Rank List??
Actually Rank list is calculated based on some criteria’s like your cutoff, total, mathematics mark, physics mark, computer science or biology(4th optional subject), Date of birth and random number
Random number has been published now next is calculating of the TNEA 2012 Rank list
How they are assigning Rank to each candidate??
We can say the Rank is a unique number which will be assigned to each candidate, as i already said the Rank will be calculated base on criteria’s which i have mentioned above.
Yes the Rank list is very very important because according to your Rank list only your date and time of counselling schedule will be declare to each and every individual candidates
After the Rank list publishes what i have to do??
After Anna university publishes the Rank list on June 30th means next you have to wait for your call letter, the call letter will be consists of all details that when you have to attend the counselling






By Vinoth

by Vinoth · 0

Anna University exam paper chasing - answer sheet chasing

Many have heard about anna university exam paper chasing.
Do you believe in that ?
Yeah it happens and everyone knows it but it haven't came to light.
Even thought it is done in dark every year few professors/lecturer are charged for malpractice or fraud.
Although government is trying to improve literacy rate of Tamil Nadu and all our education system getting worse by few people.
Before engineering degree are felt great and hard to get it but now there is no competition and if you pass you can get into engineering college.
Then these people suffer lot to clear a paper. Even high scorer in 12th struggle in engineering college due to lack of interest and proper knowledge.
Most of the college debar or dismiss a student if he doesn't perform well or curtain arrear limit reach.
So they are forced to pass and due to pressure the search for illegal way to pass in exam by malpractice during examination or after by chasing paper.
Money plays everywhere. Professor are forced to do fraud.
Every year few students get passed by paper chasing.

This year it became a big issue few assistant professors are charged and arranged a committee to submit report about scam.


The Anna University has launched a probe into the alleged exam marks racket in the university at a time when a letter, allegedly written by a senior faculty member, is doing the rounds blaming vice-chancellor Prof. P. Mannar Jawahar for the scam.

The issue came to light when the faculty who allegedly evaluated the answer scripts of some influential students wrote to the chief minister’s special cell about the scam.

Meanwhile an anonymous letter believed to have been written by a senior faculty member in the university blamed university vice-chancellor Prof. P. Mannar Jawahar for the scam. The faculty member claimed that he had given a copy of an anonymous letter he had received about one of the dean’s involvement in the scam, to the present controller of examination Dr M. Venkatesan and additional controller of examinations Dr P. Narayanasamy.

“The faculty member from Madras Institute of Technology (MIT) had re-valued 18 subjects in a single day just a few days before the start of the semester examinations. He has given more than 50/60 marks for all the 18 subjects to f one student. The dean had asked the person, under the instructions of the V-C, to re-value the papers of a CEG student by an MIT staff,” the letter claimed.

When this correspondent asked the vice-chancellor for his comments about the scam and the anonymous letter, he said that the university had launched a probe to look into the issue.

To Read more click here --->  http://eeeexclusive.blogspot.in/2012/06/anna-university-marks-scam-anna.html

Anna University - How to chase paper :

Paper chasing is not much easier thing. Anna university paper correcting staff don't even know your exam number. Every paper have a unique number it will be visible to them. They find the paper by that number.

Please don't try for paper chasing.




By Vinoth

by Vinoth · 6

GE2022 TOTAL QUALITY MANAGEMENT Lecture Notes for MECH - Seventh (7th) semester -by R.Anirudhan

GE2022 TOTAL QUALITY MANAGEMENT Lecture Notes for MECH - Seventh (7th) semester 


GE2022 Lecture Notes 

Syllabus :

UNIT I INTRODUCTION 
Introduction - Need for quality - Evolution of quality - Definition of quality - Dimensions of
manufacturing and service quality - Basic concepts of TQM - Definition of TQM – TQM
Framework - Contributions of Deming, Juran and Crosby – Barriers to TQM.

UNIT II TQM PRINCIPLES 
Leadership – Strategic quality planning, Quality statements - Customer focus –
Customer orientation, Customer satisfaction, Customer complaints, Customer retention -
Employee involvement – Motivation, Empowerment, Team and Teamwork, Recognition
and Reward, Performance appraisal - Continuous process improvement – PDSA cycle,
5s, Kaizen - Supplier partnership – Partnering, Supplier selection, Supplier Rating.

UNIT III TQM TOOLS & TECHNIQUES I 
The seven traditional tools of quality – New management tools – Six-sigma: Concepts,
methodology, applications to manufacturing, service sector including IT – Bench marking
– Reason to bench mark, Bench marking process – FMEA – Stages, Types.

UNIT IV TQM TOOLS & TECHNIQUES II 
Quality circles – Quality Function Deployment (QFD) – Taguchi quality loss function –
TPM – Concepts, improvement needs – Cost of Quality – Performance measures.

UNIT V QUALITY SYSTEMS 
Need for ISO 9000- ISO 9000-2000 Quality System – Elements, Documentation, Quality
auditing- QS 9000 – ISO 14000 – Concepts, Requirements and Benefits – Case studies
of TQM implementation in manufacturing and service sectors including IT.


download Total Quality Management Lecture Notes 






By Vinoth

by Anirudhan R · 0

ME 2202 ENGINEERING THERMODYNAMICS Lecture Notes for MECH - Third Semester -by R.Anirudhan

ME 2202 ENGINEERING THERMODYNAMICS Lecture Notes for MECH - Third Semester


ME2202 Lecture Notes 

Syllabus :


UNIT I BASIC CONCEPT AND FIRST LAW
Basic concepts - concept of continuum, macroscopic approach, Thermodynamic
systems - closed, open and isolated. Property, state, path and process, quasi-static
process, work, modes of work, Zeroth law of thermodynamics – concept of temperature
and heat. Concept of ideal and real gases. First law of thermodynamics – application to
closed and open systems, internal energy, specific heat capacities, enthalpy, steady flow
process with reference to various thermal equipments.

UNIT II SECOND LAW
Second law of thermodynamics – Kelvin’s and Clausius statements of second law.
Reversibility and irreversibility. Carnot theorem, Carnot cycle, reversed carnot cycle,
efficiency, COP. Thermodynamic temperature scale, Clausius inequality, concept of
entropy, entropy of ideal gas, principle of increase of entropy – availability.

UNIT III PROPERTIES OF PURE SUBSTANCE AND STEAM
POWER CYCLE
Properties of pure substances – Thermodynamic properties of pure substances in solid,
liquid and vapour phases, phase rule, P-V, P-T, T-V, T-S, H-S diagrams, PVT surfaces,
thermodynamic properties of steam. Calculations of work done and heat transfer in nonflow
and flow processes. Standard Rankine cycle, Reheat and regenerative cycle.

UNIT IV IDEAL AND REAL GASES AND THERMODYNAMIC
RELATIONS
Gas mixtures – properties ideal and real gases, equation state, Avagadro’s Law, Vander
Waal’s equation of state, compressability factor, compressability chart – Dalton’s law of
partial pressure, exact differentials, T-D relations, Maxwell’s relations, Clausius
Clapeyron equations, Joule –Thomson coefficient.

UNIT V PSYCHROMETRY
Psychrometry and psychrometric charts, property calculations of air vapour mixtures.
Psychrometric process – Sensible heat exchange processes. Latent heat exchange
processes. Adiabatic mixing, evaporative cooling


download Engineering Thermodynamics Lecture Notes 





By Vinoth

by Anirudhan R · 0

ME2204 FLUID MECHANICS AND MACHINERY Lecture notes for MECH - Third (3rd) semester by R.Anirudhan

ME2204 FLUID MECHANICS AND MACHINERY Lecture notes for MECH - Third (3rd) semester


ME2204 Lecture Notes 

Syllabus :

UNIT I INTRODUCTION
Units & Dimensions. Properties of fluids – Specific gravity, specific weight, viscosity,
compressibility, vapour pressure and gas laws – capillarity and surface tension. Flow
characteristics: concepts of system and control volume. Application of control volume to
continuity equiation, energy equation, momentum equation and moment of momentum
equation.

UNIT II FLOW THROUG CIRCULAR CONDUITS
Laminar flow though circular conduits and circular annuli. Boundary layer concepts.
Boundary layer thickness. Hydraulic and energy gradient. Darcy – Weisbach equaition.
Friction factor and Moody diagram. Commercial pipes. Minor losses. Flow though pipes
in series and in parallel.

UNIT III DIMENSIONAL ANALYSIS 
Dimension and units: Buckingham’s П theorem. Discussion on dimensionless
parameters. Models and similitude. Applications of dimensionless parameters.

UNIT IV ROTO DYNAMIC MACHINES
Homologus units. Specific speed. Elementary cascade theory. Theory of turbo
machines. Euler’s equation. Hydraulic efficiency. Velocity components at the entry and
exit of the rotor. Velocity triangle for single stage radial flow and axial flow machines.
Centrifugal pumps, turbines, performance curves for pumps and turbines.

UNIT V POSITIVE DISPLACEMENT MACHINES
Recriprocating pumps, Indicator diagrams, Work saved by air vessels. Rotory pumps.
Classification. Working and performance curves.


download Fluid Mechannics and Machinery Lecture Notes





By Vinoth

by Anirudhan R · 0

ME2402 COMPUTER INTEGRATED MANUFACTURING Lecture Notes for MECH - Sixth (6th) semester by R.Anirudhan

ME2402 COMPUTER INTEGRATED MANUFACTURING Lecture Notes for MECH - Sixth (6th) semester


ME2402 Lecture Notes

Syllabus :

UNIT I COMPUTER AIDED DESIGN
Concept of CAD as drafting and designing facility, desirable features of CAD package,
drawing features in CAD – Scaling, rotation, translation, editing, dimensioning, labeling,
Zoom, pan, redraw and regenerate, typical CAD command structure, wire frame
modeling, surface modeling and solid modeling (concepts only) in relation to popular
CAD packages.

UNIT II COMPONENTS OF CIM
CIM as a concept and a technology, CASA/Sme model of CIM, CIM II, benefits of CIM,
communication matrix in CIM, fundamentals of computer communication in CIM – CIM
data transmission methods – seriel, parallel, asynchronous, synchronous, modulation,
demodulation, simplex and duplex. Types of communication in CIM – point to point
(PTP), star and multiplexing. Computer networking in CIM – the seven layer OSI model,
LAN model, MAP model, network topologies – star, ring and bus, advantages of
networks in CIM

UNIT III GROUP TECHNOLOGY AND COMPUTER AIDED PROCESS
PLANNING
History Of Group Technology – role of G.T in CAD/CAM Integration – part familiesclassification
and coding – DCLASS and MCLASS and OPTIZ coding systems – facility
design using G.T – benefits of G.T – cellular manufacturing.Process planning - role of
process planning in CAD/CAM Integration – approaches to computer aided process
planning – variant approach and generative approaches – CAPP and CMPP systems.

UNIT IV SHOP FLOOR CONTROL AND INTRODUCTION TO FMS
shop floor control – phases – factory data collection system – automatic identification
methods – Bar code technology – automated data collection system.
FMS – components of FMS – types – FMS workstation – material handling and storage
system –FMS layout- computer control systems – applications and benefits.

UNIT V COMPUTER AIDED PLANNING AND CONTROL AND COMPUTER
MONITORING
Production planning and control – cost planning and control – inventory management –
material requirements planning (MRP) – shop floor control. Lean and Agile
Manufacturing. Types of production monitoring systems – structure model of
manufacturing – process control and strategies – direct digital control.


download Computer Integrated Manufacturing Lecture Notes









By Vinoth

by Anirudhan R · 1

ME2034 NUCLEAR ENGINEERING Lecture Notes for MECH - Seventh Semester -by R.Anirudhan

ME2034 NUCLEAR ENGINEERING Lecture Notes for MECH - Seventh Semester 


ME2034 Lecture Notes

Syllabus :

UNIT I NUCLEAR PHYSICS
Nuclear model of an atom-Equivalence of mass and energy-binding- radio activity-half
life-neutron interactions-cross sections.

UNIT II NUCLEAR REACTIONS AND REACTION MATERIALS
Mechanism of nuclear fission and fusion- radio activity- chain reactions-critical mass and
composition-nuclear fuel cycles and its characteristics-uranium production and
purification-Zirconium, thorium, beryllium.

UNIT III REPROCESSING
Reprocessing: nuclear fuel cycles-spent fuel characteristics-role of solvent extraction in
reprocessing-solvent extraction equipment.

UNIT IV NUCLEAR REACTOR
Nuclear reactors: types of fast breeding reactors-design and construction of fast
breeding reactors-heat transfer techniques in nuclear reactors- reactor shielding. Fusion
reactors.

UNIT V SAFETY AND DISPOSAL
Safety and disposal: Nuclear plant safety-safety systems-changes and consequences of
accident-criteria for safety-nuclear waste-types of waste and its disposal-radiation
hazards and their prevention-weapons proliferation.



download Nuclear Engineering Lecture Notes







By Vinoth

by Anirudhan R · 0

ME2027 PROCESS PLANNING AND COST ESTIMATION Lecture Notes (COMMON TO MECHANICAL AND PRODUCTION - Seventh (7th) semester) -by R.Anirudhan

ME2027 PROCESS PLANNING AND COST ESTIMATION Lecture Notes ( COMMON TO MECHANICAL AND PRODUCTION - Seventh (7th) semester )

ME2027 Lecture Notes 

Syllabus :

UNIT I WORK STUDY AND ERGONOMICS
Method study – Definition – Objectives-Motion economy- Principles – Tools and
Techniques-Applications – Work measurements- purpose – use – procedure – tools and
techniques- Standard time –Ergonomics – principles – applications.

UNIT II PROCESS PLANNING
Definition – Objective – Scope – approaches to process planning- Process planning
activities – Finished part requirements- operating sequences- machine selection –
material selection parameters- Set of documents for process planning- Developing
manufacturing logic and knowledge- production time calculation – selection of cost
optimal processes.

UNIT III INTRODUCTION TO COST ESTIMATION
Objective of cost estimation- costing – cost accounting- classification of cost- Elements
of cost.

UNIT IV COST ESTIMATION
Types of estimates – methods of estimates – data requirements and sources- collection
of cost- allowances in estimation.

UNIT V PRODUCTION COST ESTIMATION
Estimation of material cost, labour cost and over heads, allocation of overheads –
Estimation for different types of jobs.


download Process Planning and Cost Estimation Lecture Notes





By Vinoth

by Anirudhan R · 0

ME2032 COMPUTATIONAL FLUID DYNAMICS Lecture Notes for MECH - Seventh (7th) semester by R.Anirudhan

ME2032 COMPUTATIONAL FLUID DYNAMICS Lecture Notes for MECH - Seventh (7th) semester


ME2032 Lecture Notes 

syllabus :

PREREQUISITE:
Fundamental Knowledge of partial differential equations, Heat Transfer and Fluid
Mechanics
UNIT I GOVERNING EQUATIONS AND BOUNDARY CONDITIONS
Basics of computational fluid dynamics – Governing equations of fluid dynamics –
Continuity, Momemtum and Energy equations – Chemical species transport – Physical
boundary conditions – Time-averaged equations for Turbulent Flow – Turbulent–Kinetic
Energy Equations – Mathematical behaviour of PDEs on CFD - Elliptic, Parabolic and
Hyperbolic equations.

UNIT II FINITE DIFFERENCE METHOD
Derivation of finite difference equations – Simple Methods – General Methods for first
and second order accuracy – solution methods for finite difference equations – Elliptic
equations – Iterative solution Methods – Parabolic equations – Explicit and Implicit
schemes – Example problems on elliptic and parabolic equations.

UNIT III FINITE VOLUME METHOD (FVM) FOR DIFFUSION
Finite volume formulation for steady state One, Two and Three -dimensional diffusion
problems. One dimensional unsteady heat conduction through Explicit, Crank –
Nicolson and fully implicit schemes.

UNIT IV FINITE VOLUME METHOD FOR CONVECTION DIFFUSION
Steady one-dimensional convection and diffusion – Central, upwind differencing
schemes-properties of discretization schemes – Conservativeness, Boundedness,
Trasnportiveness, Hybrid, Power-law, QUICK Schemes.

UNIT V CALCULATION FLOW FIELD BY FVM
Representation of the pressure gradient term and continuity equation – Staggered grid –
Momentum equations – Pressure and Velocity corrections – Pressure Correction
equation, SIMPLE algorithm and its variants. Turbulence models, mixing length model,
Two equation (k-Є) models – High and low Reynolds number models



download Computational Fluid Dynamics Lecture Notes






By Vinoth

by Anirudhan R · 0

Anna University Notes - 5th Semester MECH - Lecture Notes for B.E.MECH Fifth Semester - by R.Anirudhan

Anna University Notes - 5th Semester MECH - Lecture Notes for B.E.MECH Fifth Semester


Lecture Notes for B.E CSE Third Semester

Notes for all subjects are provided below




select the subject 














By Vinoth

by Anirudhan R · 0

ME2305 APPLIED HYDRAULICS AND PNEUMATICS Lecture Notes for MECH - Fifth (5th) Semester- by R.Anirudhan

ME2305 APPLIED HYDRAULICS AND PNEUMATICS Lecture Notes for MECH - Fifth (5th) Semester


ME2305 Applied Hydraulics and Pnematics Lecture Notes

Syllabus :

UNIT I FLUID POWER SYSTEMS AND FUNDAMENTALS
Introduction to fluid power, Advantages of fluid power, Application of fluid power system.
Types of fluid power systems, Properties of hydraulic fluids – General types of fluids –
Fluid power symbols. Basics of Hydraulics-Applications of Pascals Law- Laminar and
Turbulent flow – Reynold’s number – Darcy’s equation – Losses in pipe, valves and
fittings.

UNIT II HYDRAULIC SYSTEM & COMPONENTS
Sources of Hydraulic Power: Pumping theory – Pump classification – Gear pump, Vane
Pump, piston pump, construction and working of pumps – pump performance – Variable
displacement pumps. Fluid Power Actuators: Linear hydraulic actuators – Types of
hydraulic cylinders – Single acting, Double acting special cylinders like tanden, Rodless,
Telescopic, Cushioning mechanism, Construction of double acting cylinder, Rotary
actuators – Fluid motors, Gear, Vane and Piston motors.

UNIT III DESIGN OF HYDRAULIC CIRCUITS
Construction of Control Components : Directional control valve – 3/2 way valve – 4/2
way valve – Shuttle valve – check valve – pressure control valve – pressure reducing
valve, sequence valve, Flow control valve – Fixed and adjustable, electrical control
solenoid valves, Relays, ladder diagram. Accumulators and Intensifiers: Types of
accumulators – Accumulators circuits, sizing of accumulators, intensifier – Applications
of Intensifier – Intensifier circuit.

UNIT IV PNEUMATIC SYSTEMS AND COMPONENTS
Pneumatic Components: Properties of air – Compressors – Filter, Regulator, Lubricator
Unit – Air control valves, Quick exhaust valves, pneumatic actuators. Fluid Power Circuit
Design, Speed control circuits, synchronizing circuit, Penumo hydraulic circuit,
Sequential circuit design for simple applications using cascade method.

UNIT V DESIGN OF PNEUMATIC CIRCUITS
Servo systems – Hydro Mechanical servo systems, Electro hydraulic servo systems and
proportional valves. Fluidics – Introduction to fluidic devices, simple circuits, Introduction
to Electro Hydraulic Pneumatic logic circuits, ladder diagrams, PLC applications in fluid
power control. Fluid power circuits; failure and troubleshooting.



download Applied Hydraulics and Pneumatics Lecture notes 




By Vinoth

by Anirudhan R · 0

CE2204 SURVEYING I Lecture Notes for CIVIL - Third (3rd) Semester -by R.Anirudhan

CE2204 SURVEYING I Lecture Notes for CIVIL - Third (3rd) Semester 


CE2204 Surveying I Lecture Notes 

Syllabus :

UNIT I INTRODUCTION AND CHAIN SURVEYING
Definition - Principles - Classification - Field and office work - Scales - Conventional signs -
Survey instruments, their care and adjustment - Ranging and chaining - Reciprocal ranging -
Setting perpendiculars - well - conditioned triangles - Traversing - Plotting - Enlarging and
reducing figures.

UNIT II COMPASS SURVEYING AND PLANE TABLE SURVEYING
Prismatic compass - Surveyor’s compass - Bearing - Systems and conversions - Local
attraction - Magnetic declination - Dip - Traversing - Plotting - Adjustment of errors - Plane table
instruments and accessories - Merits and demerits - Methods - Radiation - Intersection -
Resection - Traversing.

UNIT III LEVELLING AND APPLICATIONS
Level line - Horizontal line - Levels and Staves - Spirit level - Sensitiveness - Bench marks -
Temporary and permanent adjustments - Fly and check levelling - Booking - Reduction -
Curvature and refraction - Reciprocal levelling - Longitudinal and cross sections - Plotting -
Calculation of areas and volumes - Contouring - Methods - Characteristics and uses of contours
- Plotting - Earth work volume - Capacity of reservoirs.

UNIT IV THEODOLITE SURVEYING
Theodolite - Vernier and microptic - Description and uses - Temporary and permanent
adjustments of vernier transit - Horizontal angles - Vertical angles - Heights and distances -
Traversing - Closing error and distribution - Gale’s tables - Omitted measurements.

UNIT V ENGINEERING SURVEYS
Reconnaissance, preliminary and location surveys for engineering projects - Lay out - Setting
out works - Route Surveys for highways, railways and waterways - Curve ranging - Horizontal
and vertical curves - Simple curves - Setting with chain and tapes, tangential angles by
theodolite, double theodolite - Compound and reverse curves - Transition curves - Functions
and requirements - Setting out by offsets and angles - Vertical curves - Sight distances - Mine
Surveying - instruments - Tunnels - Correlation of under ground and surface surveys - Shafts -
Adits.



download Surveying I Lecture Notes







By Vinoth

by Anirudhan R · 0

CE2203 CONSTRUCTION TECHNIQUES, EQUIPMENT AND PRACTICES Lecture Notes for CIVIL - Third (3rd) Semester -by R.Anirudhan

CE2203 CONSTRUCTION TECHNIQUES, EQUIPMENT AND PRACTICES Lecture Notes for CIVIL - Third (3rd) Semester 

CE2203 construction technique, equipment and practices lecture notes

Syllabus :


UNIT I CONCRETE TECHNOLOGY
Cements – Grade of cements - manufacture of cement – concrete chemicals and Applications –
Mix design concept – mix design as per BIS & ACI methods – manufacturing of concrete –
Batching – mixing – transporting – placing – compaction of concrete – curing and finishing.
Testing of fresh and hardened concrete – quality of concrete - Non – destructive testing.

UNIT II CONSTRUCTION PRACTICES
Specifications, details and sequence of activities and construction co-ordination – Site
Clearance – Marking – Earthwork - masonry – stone masonry – Bond in masonry - concrete
hollow block masonry – flooring – damp proof courses – construction joints – movement and
expansion joints – pre cast pavements – Building foundations – basements – temporary shed –
centering and shuttering – slip forms – scaffoldings – de-shuttering forms – Fabrication and
erection of steel trusses – frames – braced domes – laying brick –– weather and water proof –
roof finishes – acoustic and fire protection.

UNIT III SUB STRUCTURE CONSTRUCTION
Techniques of Box jacking – Pipe Jacking -under water construction of diaphragm walls and
basement-Tunneling techniques – Piling techniques - well and caisson - sinking cofferdam -
cable anchoring and grouting-driving diaphragm walls, sheet piles - shoring for deep cutting -
well points -Dewatering and stand by Plant equipment for underground open excavation.

UNIT IV SUPER STRUCTURE CONSTRUCTION
Launching girders, bridge decks, off shore platforms – special forms for shells - techniques for
heavy decks – in-situ pre-stressing in high rise structures, Material handling - erecting light
weight components on tall structures - Support structure for heavy Equipment and conveyors -
Erection of articulated structures, braced domes and space decks.

UNIT V CONSTRUCTION EQUIPMENT
Selection of equipment for earth work - earth moving operations - types of earthwork equipment
- tractors, motor graders, scrapers, front end waders, earth movers – Equipment for foundation
and pile driving. Equipment for compaction, batching and mixing and concreting - Equipment for
material handling and erection of structures - Equipment for dredging, trenching, tunneling,

download Construction techniques,equipment and practices lecture notes




By Vinoth

by Anirudhan R · 0

CE2202 MECHANICS OF FLUIDS Lecture Notes for CIVIL - Third (3rd) semester -by R.Anirudhan

CE2202 MECHANICS OF FLUIDS Lecture Notes for CIVIL - Third (3rd) semester 

CE2202 Mechanics of fluids lecture notes 

syllabus :

UNIT I DEFINITIONS AND FLUID PROPERTIES 
Definitions – Fluid and fluid mechanics – Dimensions and units – Fluid properties – Continuum
Concept of system and control volume

UNIT II FLUID STATICS & KINEMATICS 
Pascal’s Law and Hydrostatic equation – Forces on plane and curved surfaces – Buoyancy –
Meta centre – Pressure measurement – Fluid mass under relative equilibrium
Fluid Kinematics
Stream, streak and path lines – Classification of flows – Continuity equation (one, two and three
dimensional forms) – Stream and potential functions – flow nets – Velocity measurement (Pilot
tube, current meter, Hot wire and hot film anemometer, float technique, Laser Doppler
velocimetry)

UNIT III FLUID DYNAMICS 
Euler and Bernoulli’s equations – Application of Bernoulli’s equation – Discharge measurement
– Laminar flows through pipes and between plates – Hagen Poiseuille equation – Turbulent flow
– Darcy-Weisbach formula – Moody diagram – Momentum Principle

UNIT IV BOUNDARY LAYER AND FLOW THROUGH PIPES 
Definition of boundary layer – Thickness and classification – Displacement and momentum
thickness – Development of laminar and turbulent flows in circular pipes – Major and minor
losses of flow in pipes – Pipes in series and in parallel – Pipe network

UNIT V SIMILITUDE AND MODEL STUDY 
Dimensional Analysis – Rayleigh’s method, Buckingham’s Pi-theorem – Similitude and models –
Scale effect and distorted models.


download Mechanics of Fluids Lecture Notes








By Vinoth

by Anirudhan R · 0

CE2201 MECHANICS OF SOLIDS lecture notes for CIVIL - Third (3rd) semester - by R.Anirudhan

CE2201 MECHANICS OF SOLIDS lecture notes for CIVIL - Third (3rd) semester 

Syllabus :

UNIT I STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS
Rigid bodies and deformable solids – stability, strength, stiffness – tension, compression and
shear stresses – strain, elasticity, Hooke’s law, limit of proportionately, modules of elasticity,
stress-strain curve, lateral strain – temperature stresses – deformation of simple and compound
bars – shear modulus, bulk modulus, relationship between elastic constants – biaxial state of
stress – stress at a point – stress on inclined plane – principal stresses and principal planes –
Mohr’s circle of stresses.

UNIT II ANALYSIS OF PLANE TRUSS, THIN CYLINDERS / SHELLS
Stability and equilibrium of plane frames – types of trusses – analysis of forces in truss
members method of joints, method of sections, method of tension coefficients – thin cylinders
and shells – under internal pressure – deformation of thin cylinders and shells.

UNIT III TRANSVERSE LOADING ON BEAMS
Beams – types of supports – simple and fixed, types of load – concentrated, uniformly
distributed, varying distributed load, combination of above loading – relationship between
bending moment and shear force – bending moment, shear force diagram for simply supported,
cantilever and over hanging beams – Theory of simple bending – analysis of stresses – load
carrying capacity of beams – proportioning of sections

UNIT IV DEFLECTION OF BEAMS AND SHEAR STRESSES
Deflection of beams – double integration method – Macaulay’s method – slope and deflection
using moment area method, Conjugate Beam method – variation of shear stress – shear stress
distribution in rectangular, I sections, solid circular sections, hollow circular sections, angle and
channel sections – shear flow – shear centre.

UNIT V TORSION AND SPRINGS
Stresses and deformation in circular (solid and hollow shafts) – stepped shafts – shafts fixed at
both ends – leaf springs – stresses in helical springs – deflection of springs.


download Mechanics of Solids Lecture Notes








By Vinoth

by Anirudhan R · 0

www.periyaruniversity.ac.in - Periyar Universtiy April/May 2012 - UG & PG Semester Examination Results 2012 - BA BSc BCom MBA BBA BCA

Periyar Universtiy April/May 2012 - UG & PG Semester Examination Results 2012 -  BA BSc BCom MBA BBA BCA


Results Announced !!!














By Vinoth

by Vinoth · 0

AG2211 APPLIED GEOLOGY lecture notes for CIVIL - Third (3rd) semester -by R.Anirudhan

AG2211 APPLIED GEOLOGY lecture notes for CIVIL - Third (3rd) semester 

AG2211 Applied Geology Lecture notes


syllabus :
UNIT I GENERAL GEOLOGY
Geology in Civil Engineering – Branches of geology – Earth Structures and composition –
Elementary knowledge on continental drift and plate technologies. Earth processes –
Weathering – Work of rivers, wind and sea and their engineering importance – Earthquake belts
in India. Groundwater – Mode of occurrence – prospecting – importance in civil engineering

UNIT II MINERALOGY
Elementary knowledge on symmetry elements of important crystallographic systems – physical
properties of minerals – study of the following rock forming minerals – Quartz family. Feldpar
family, Augite, Hornblende, Biotite, Muscovite, Calcite, Garnet – properties, behaviour and
engineering significance of clay minerals – Fundamentals of process of formation of ore
minerals – Coal and petroleum – Their origin and occurrence in India.

UNIT III PETROLOGY
Classification of rocks – distinction between igneous, sedimentary and metamorphic rocks.
Description occurrence, engineering properties and distribution of following rocks. Igneous rocks
– Granite, Syenite, Diorite, Gabbro, Pegmatite, Dolerite and Basalt Sedimentary rocks
sandstone, Limestone, shale conglo, Conglomerate and breccia. Metamorphic rocks. Quartizite,
Marble, Slate, Phyllite, Gniess and Schist.

UNIT IV STRUCTURAL GEOLOGY AND GEOPHYSICAL METHOD
Attitude of beds – Outcrops – Introduction to Geological maps – study of structures – Folds,
faults and joints – Their bearing on engineering construction. Seismic and Electrical methods for
Civil Engineering investigations

UNIT V GEOLOGICAL INVESTIGATIONS IN CIVIL ENGINEERING
Remote sensing techniques – Study of air photos and satellite images – Interpretation for Civil
Engineering projects – Geological conditions necessary for construction of Dams, Tunnels,
Buildings, Road cuttings, Land slides – Causes and preventions. Sea erosion and coastal
protection.


Download Applied Geology Lecture Notes  





By Vinoth

by Anirudhan R · 0

EE2201 MEASUREMENTS AND INSTRUMENTATION lecture notes for EEE -Third (3th) Semester -by R.Anirudhan

EE2201 MEASUREMENTS AND INSTRUMENTATION lecture notes for EEE -Third (3th) Semester 

content :

UNIT I INTRODUCTION 
Functional elements of an instrument – Static and dynamic characteristics – Errors in measurement
– Statistical evaluation of measurement data – Standards and calibration.

UNIT II ELECTRICAL AND ELECTRONICS INSTRUMENTS 
Principle and types of analog and digital voltmeters, ammeters, multimeters – Single and three
phase wattmeters and energy meters – Magnetic measurements – Determination of B-H curve and
measurements of iron loss – Instrument transformers – Instruments for measurement of frequency
and phase.

UNIT III COMPARISON METHODS OF MEASUREMENTS 
D.C & A.C potentiometers, D.C & A.C bridges, transformer ratio bridges, self-balancing bridges.
Interference & screening – Multiple earth and earth loops - Electrostatic and electromagnetic
interference – Grounding techniques.

UNIT IV STORAGE AND DISPLAY DEVICES 
Magnetic disk and tape – Recorders, digital plotters and printers, CRT display, digital CRO, LED,
LCD & dot matrix display – Data Loggers.

UNIT V TRANSDUCERS AND DATA ACQUISITION SYSTEMS 
Classification of transducers – Selection of transducers – Resistive, capacitive & inductive
transducers – Piezoelectric, optical and digital transducers – Elements of data acquisition system –
A/D, D/A converters – Smart sensors.

download measurement and instrumentation lecture notes link 1
download measurement and instrumentation lecture notes link 2
download measurement and instrumentation lecture notes link 3





By Vinoth

by Anirudhan R · 0

Civil Engineering Practical Notes ( A - Z ) by R.Anirudhan

Civil Engineering Practical Notes ( A - Z ) 

CONTENTS :
Preface
1. Bridge Works
2. Concrete Works
3. Drainage Works
4. Geotechnical Works
5. Marine Works
6. Piles and Foundation
7. Roadworks
8. Steelworks
9. Waterworks and Tunneling



download Civil Engineering Practical Notes




By Vinoth

by Anirudhan R · 0

Anna University Notes - 3th Semester CSE - Lecture notes for B.E.CSE Third Semester


Lecture notes for B.E. CSE Third Semester

Notes for all subjects of CSE 3rd semester are provided below.



Select the subject


MA 2211 Transforms and Partial Differential Equations
CS 2201 Data Structures
CS 2202 Digital Principles and Systems Design
CS 2203 Object Oriented Programming
CS 2204 Analog and Digital Communication
GE 2021 Environmental Science and Engineering





*All the notes will be provided as soon as possible.






by Vinoth · 0

Anna University Notes - 7th Semester CSE - Lecture notes for B.E.CSE THIRD Semester


Lecture notes for B.E. EEE SEVENTH Semester

Notes for all subjects of EEE 7th semester are provided below.



Select the subject


MG2452 Engineering Economics & Financial Accounting
CS2401 Computer Graphics
CS2402 Mobile and Pervasive Computing
CS2403 Digital Signal Processing
              ELECTIVE

MG2453 Resource Management Techniques
CS2032 Data Warehousing and Data Mining
CS2033 Real Time Systems
CS2034 TCP/IP Design and Implementation
CS2035 Natural Language Processing
IT2024 User Interface Design
IT2401 Service Oriented Architecture

             ELECTIVE

CS2040 Advanced Operating Systems
CS2041 C# and .NET Framework
IT2352 Cryptography and Network Security
IT2061 Systems Modeling & Simulation
GE2022 Total Quality Management
IT2351 Network Programming and Management
IT2032 Software Testing
CS2045 Wireless Networks




*All the notes will be provided as soon as possible.

by Vinoth · 0

Anna University Notes - 5th Semester CSE - Lecture notes for B.E.CSE Fifth Semester


Lecture notes for B.E. CSE Fifth Semester

Notes for all subjects of CSE 5th semester are provided below.



Select the subject






*All the notes will be provided as soon as possible.










By Vinoth

by Vinoth · 0



All Rights Reserved Anna University Revaluation Results 2014 May/June 2014 - iAnnauniversity |
| My Google+ Profile | Find us on Google+